Notice of Online Archive

  • This page is no longer being updated and remains online for informational and historical purposes only. The information is accurate as of the last page update.

    For questions about page contents, contact the Communications Division.

By Bryan Hay

There’s no limit to innovative expression when you bring together AAA batteries, microprocessors, and the vivid imaginations from Lafayette electrical and computer engineering majors.

Five teams of students studying Embedded Systems with Jon Wallace, associate professor of electrical and computer engineering, produced a creative array of projects, each with the potential for commercial applications, working with $70 budgets.

Here’s a look at what came out of the labs on the fourth floor of Acopian Engineering Center in just seven weeks.

Clark Griswold’s utopia

Katie Lee ’19, Simone Khalifa ’20, and Leah Diamantides ’20 designed a scale model of an exterior LED display for the home controlled by a touch screen. With a touch of a finger, it allows a homeowner to control outdoor decorative lighting schemes to match the season. Lights can be configured to flash in different sequences and display different colors.

A house model with LED lights built into the walls. “We were challenged to come up with different ideas at the end of a lab one day, and we thought it would be a good idea to make something festive for around the holidays,” Lee says. “Our design also plays Christmas carols. We thought it’d be a cool idea to incorporate sounds into our design.”

Their miniature house, with its evergreen landscaping, is studded with lights below the roofline and glows with dazzling color as the students manipulate different patterns from the touch screen.   

Three female students gather around the house model they constructed.There are a lot of outdoor lighting systems on the market, but they can be expensive and difficult to operate.

“But with this touch screen anyone can create their own light show,” Lee says. “We did red, green, and white for Christmas and red and white for Valentine’s Day.”

Building a better drone

Seniors Hongbo Du ’19, Yuqiu Zang, and Zian Geng ’19 embarked on what was probably the most ambitious and complex project by developing a system that would allow them to use custom software to accomplish a variety of drone flight missions.  

Three male students inspect the drone they built.The basic hardware system is not much different from a standard drone, but it required them to program and connect many different components together, including the sensors, motor speed management, balance control, and navigation.  

They also developed a smartphone interface that allowed the drone to be manually controlled, tested the system, and managed a couple successful flights. Because the students needed powerful motors and batteries for their drone, the project went over budget. While the rules specified a $70 budget, students are allowed to invest their own money for their projects.

Beyond Betty Crocker

Every baker knows the critical importance of the right proportions of sugar, flour, salt, and baking soda. If the ingredients are off even just a little, a cake or loaf of bread will fall flat, dry out, or crumble before your eyes.

Electrical and computer engineering majors Jordyn Brosemer ’20 and Maureen McShane ’20 built a device, dubbed the “Baking Buddy,” that ensures baking perfection by using a computer to dispense exact amounts of required ingredients for any given recipe.

Female student explains how the baking machine works to another classmate.The computer interface controls a series of rotating canisters that release various ingredients into a bowl below.

“On the computer it will say choose ingredients and ask you how much is needed,” Brosemer explains. “How much is needed will determine how much the motors will spin to deposit the ingredients without over-spilling.”

“We were doing research and wanted to do something food related,” McShane says. “We had an idea for a meat flipper. But then we considered that measuring ingredients precisely is very important when you’re baking. And I love to bake.”

Brosemer and McShane believe their prototype might have applications for large-scale commercial bakeries.

“It looks like an arts-and-crafts project now, but it’s something that’s not been done before, and we liked the challenge of it,” she says. “It’s one of the great things about Lafayette, to have the freedom to explore ideas.”

Lending a hand

Someday not too far into the future, a robot may be taking your food order at a restaurant and preparing it in the kitchen. Tasks like cracking an egg, which requires human dexterity, will be among the many job requirements for a food-service robot.

Max McFarlane ’19 and Samuel Mwaura ’19 set out to capture and record human hand movements using a glove embedded with sensors. Intricate movements of finger joints are captured to inform a robotic device to carry out tasks that require tactile precision.

Two male students pose with their glove. One leans on the other who has his arms crossed.“Food prepared by robots will require a human touch,” Mwaura says. “A robot will need to be informed on how to crack an egg and perform other food preparation tasks.”

McFarlane sees other uses for the device beyond food service, including robotic sign language interpretation or even surgical procedures that would be performed remotely.

A close-up of the glove.“Having this glove can actually control a number of robots,” he says. “We’re extending the human motor complex into robotic design.”

Dr. Bop-It

From the moment they heard the project description, Alex Kmetz ’19 and Drew Carleton ’19 knew they wanted to build something fun.

“We also wanted to do something that wasn’t plugged in and held down by a computer,” Kmetz says. “We were thinking about toys, something fun on the go, and a Bop-It style game came to mind.”

The face of a control panel that operates the Dr. Bop-It toy.Their creation, housed in a custom-made acrylic box, expanded on the popular audio-based game by involving synthesized commands from faculty across the electrical and computer engineering department.

“We jokingly said one day, ‘Wouldn’t it be great to get all of the professors to voice it?’ They shockingly agreed enthusiastically,” Kmetz says. “Instead of colored buttons, they all threw in their own catch phrases.”

Prof. Ismail Jouny’s rapid-fire “hello, hello, hello” is among Kmetz’s favorite buttons to press.

Categorized in: Academic News, Electrical and Computer Engineering, Engineering, Featured News, Innovation and Research, Innovative Teaching and Learning, News and Features, Students

1 Comment

  1. Anthony McFarlane says:

    Outstanding ideas coming to life. Very impressive.

Comments are closed.